7_8_2 iUP250 Power Requirements
The iUP250 is powered by an external 12V-30V DC power supply. Both iUR250 and iUC150 card readers draw 5V power from the
iUP250 via the USB.
7_8_3 iUP250 SAM and SIM Options
The iUP250 features provisions for 2 Secure Access Modules and one optional SIM. There are also provisions for one micro SD card.
7_8_4 iUP250 Interface Options
Host interface options for the iUP250 include:
RS-232
USB Host
USB Slave
MDB Slave
MDB Master
Integration with the iUR250 is via the USB Slave port.
7_8_5 iUR250 Overview
The iUR250 integrates with the iUP250 as a MSR card and smart card reader (EMV chip and PIN). Communications with the iUP250
and power are provided through a USB interface. The iUR250 functions as a USB slave. Refer to the below image of the iUR250.
To Next Page
Loading...
