Ingenico iUC150 - Buzzer; RGB Backlight

Intégration Guide_iUC150&iUC180 20/70 Copyright © 2012 Ingenico
900009816 R11 000 01/1223 All rights reserved
For SAM/SIM cards, take care of cards orientation and do not push in excess the
cards.
After insertion, the cards position is 4 mm out of the products as shown on picture.
1.3.1.4 Buzzer
The buzzer is controlled by application. The frequency depends of software.
1.3.1.5 RGB backlight
The iUC180 has a RGB backlight controlled by applications.
SIM Slot
SAM Slot 2
SAM Slot 1
µSD Slot
Cut angle for
SAM
Cut angle for
µSD card
Cut angle for
GPRS SIM