Ingenico iUC150 - Maintenance Button and LED

Intégration Guide_iUC150&iUC180 22/70 Copyright © 2012 Ingenico
900009816 R11 000 01/1223 All rights reserved
1.3.1.7 Maintenance Button and LED
The iUC180 contactless reader has a maintenance button at the back.
- To enter LLT mode, press the button at power up or at restart, until the red LED
lights on.
- To enter Maintenance mode, press the button at power up or at restart, until the
red LED starts blinking.
- To restart the product, press the button until the blue LED lights on.