Ingenico iUC150 - SAM Installation

Intégration Guide_iUC150&iUC180 33/70 Copyright © 2012 Ingenico
900009816 R11 000 01/1223 All rights reserved
1.3.2.3 SAM Installation
1 Disconnect the iUC150 from the main power supply.
2 Open the SAM door by removing the screw.
3 Insert the SAM cards in SAM slot 1 and /or slot 2
4 Slide the SAM door and screw.
SAM door
Screwed with
M2X6
SAM slot1
SAM slot2