Intégration Guide_iUC150&iUC180 25/70 Copyright © 2012 Ingenico
900009816 R11 000 01/1223 All rights reserved
1.3.1.10 Antenna Installation
A tool is provided to help screwing the external antenna.
1. Remove the antenna tool from the cable sleeve.
2. Insert the SMA antenna cable through the slot of the antenna tool.
3. Slide the antenna tool over the SMA Cable connector.
4. Screw the cable.
The antenna tool has a rest position on the cable sealing sleeve.
Antenna
tool rest
position
To Next Page
Loading...
