INIM Electronics Prime Series

18 The control panel and peripherals
Anti-intrusion control panels
2-3-2
Aria/HG keypad
• Backlit graphic display
• Icon Easy4U interface
• Brightness sensor
•4 indicator LEDs
• Signal buzzer
• Inertial tamper protection
• Mounts to “503” outlets
• Thermometer and chronothermostat function
• 2 Input/Output terminals
• Microphone and loudspeaker for voice functions
• Built-in proximity reader
Connection of the keypad is achieved through the connector on the back and must done using
the 8 wire cable which comes with the keypad.
Table 2-13: Aria/HG - electrical and mechanical features
Voltage from 9 to 16V
Typical current draw 90mA
Terminals configurable as OC outputs 2
Maximum current draw per terminal 100mA
Dimensions (W x H x D) 140 x 115 x 27mm
Weight 228g
Table 2-14: Aria/HG - description of parts
A Display
B Brightness sensor
C LED
D Microphone
E Proximity reader
F Cable connector
G Speaker
H Counter support
I
Wall bracket sup-
port
J Screw location
K Backlocking grips
L Screw locations
M Cable entry
Aria/HG - front
A
B
D
E
C
I
Aria/HG - back
F
J
G
H
I
K
Aria/HG - wall bracket
K
L
L
L
L
L
L
M
Aria/HG - 8 wire cable
Table 2-15: Aria/HG - connection wires
colour terminal description
Red +
Cable/Terminal “ + ” of the I-BUS and RS485 BUS
Yellow D Cable/Terminal “ D ” for the I-BUS connection
Green S Cable/Terminal “ S ” for the I-BUS connection
Black - Cable/Terminal “ - ” of the I-BUS and RS485 BUS