Inmes IC-1000 ELECTRONIC - Glue Coat Adjustment

INMES Industrial ltda – COLADEIRA DE BORDA IC-1000 ELECTRONIC
14
Fig.29
Fig.30
6.5 – Adhesive adjustment
The IC-1000 ELECTRONIC edgebander is factory adjusted with the glue coat ready for use, however,
if an adjustment is necessary, please proceed in the following way:
 When the temperature on the display reaches the adhesive application temperature, click the press the
button beside the display to start the glue roller, as shown in fig. 31.
 With the machine on and adhesive in the working temperature, turn the handle clockwise to increase
the glue coat and in anticlockwise to decrease the adhesive coat fig. 32. Like that, the ideal quantity
(thickness) of adhesive is obtained to perform the job.
Fig.31
Fig.32