EasyManua.ls Logo

Inmes IC-1000 ELECTRONIC - Accident Risk Reduction; Personal Protection; Post-Operation Procedures

Inmes IC-1000 ELECTRONIC
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INMES Industrial ltda – COLADEIRA DE BORDA IC-1000 ELECTRONIC
5
1.5 – Important information for the reduction of risks of accidents
Never place your hands on the adhesive (glue pot) while it is hot;
Before starting to work with the machine, make sure there are no objects left on the machine;
Hold the piece to be glued firmly, assuring that it is fully supported on the fences;
Adapted or damaged pieces must not be used;
If any anomaly is detected, turn it off, unplug it and perform proper maintenance;
The machine must not be used if any of its protections are not working;
The machine must not be used close to inflammable liquids, dust, vapor or gases;
Never glue more than one piece at a time;
Children or untrained people must be kept away from the machine;
The operator must be properly trained (by a qualified professional) to work with this equipment;
The existing protections must not be removed. The violation of these recommendations may cause seri-
ous accidents;
1.6 - Proteçtion
Do not wear loose clothes, jewelry, ties;
Keep long hair properly held and away from the machine;
When handling hot pieces, always wear appropriate gloves for high temperatures;
Remember: One minor distraction is enough to cause serious accidents.
1.7 – When finished working with the machine
Turn the machine off;
Remove the plug from the power outlet;
Clean the machine and make sure it is ready for the next operation.