Inmes IC-1000 ELECTRONIC - Equipment Care Precautions

INMES Industrial ltda – COLADEIRA DE BORDA IC-1000 ELECTRONIC
22
Fig. 42
Fig. 43
 Then, with the spatula, scrape on the side and the bottom of the glue pot, removing all the adhesive fig.
45 and 46.
Fig. 45
 Fix the clean glue pot back in its place.
7.3 – Precautions with your equipment
Below are some necessary precautions in order to obtain the best performance and most productivity
from your machine.
 Never adjust the thickness of the adhesive until it has reached the work temperature or if the glue roller
is off. When the temperature is reached, turn the roller on per fig. 47 and proceed with the adjustment
by turning the handle fig. 48.