Inner Range 996300NAPS - Parts List; Accessories List

Inner Range Inception Security Controller Installation Manual. Rev. 6.0
© 2016 - 2023. Inner Range Pty Ltd.
7 www.innerrange.com
Parts List
Main Parts
Inception Security Controller.
Installation manual (This document).
Inception Power Supply. 24V DC. 2.5A
Beginners Guide to Inner Range Systems.
IEC power cable. Right angle.
Inception Quickstart Guide
Accessory Kit (See below)
Inception User Manual
Accessory Kit contents
4 x Metal PCB Mounting Clip. M3.
3 x 2-way 5mm Screw Terminal.
4 x M3 x 25mm pan head screw.
4 x 3-way 5mm Screw Terminal.
4 x M3 brass spacer. 8mm.
3 x 4-way 5mm Screw Terminal.
Self-adhesive Hook & Loop tape, 50 x 25mm.
2 x 6-way 5mm Screw Terminal.
2 x Cable Ties 350 x 4.8mm.
2 x Female 6.3mm QC Connectors.
20 x 2k2 End-of-line Resistors.
Battery cable pair. 40cm. Red/Black.
4 x 1N4004 Diodes (for locks. *See note below)
Ethernet patch cable. 1m
NOTE: * See “Output Relays (OUT1-4)” in the ‘WIRING DIAGRAMS’ section of this manual.
Accessories & Expansion Modules
Optional Accessories
Accessory Part Number
PS Current Required
Medium Enclosure with Tamper Switch
995201NA
N/A
Sealed Lead Acid Battery. e.g.
12V. 7AH – 18AH
UPG UB1270
CSB HR 1234W F2
N/A
Inception USB Wi-Fi Adapter. Mk II. (Inception
Controller Firmware must be V5.0.0 or later)
999039 (US Only)
25-40mA (See ‘Specifications’
section)
Inner Range SIFER Reader V1.16.0 or later.
994720 (Standard)
994720MF (Multi-format)
75mA to 150mA (Depends on LED
configuration)
Inner Range SIFER-Keypad Reader.
994725 (Standard)
994725MF (Multi-format)
75mA to 165mA (Depends on LED
configuration)
Inner Range OSDP<>Wiegand Converter
994200
20mA(Idle) 35mA(Peak)
Inception USB – RS232 Alarm Communicator
Interface Cable.
996798
Approx. 15mA
USB 12V Mini Hub.
3
rd
Party product.
See manufacturers datasheet
Integriti 3A battery-backed Smart Power Supply
996091PCB&K
N/A
Integriti 10A PFC battery-backed Smart PS
996095NA
N/A
Replacement 24VDC Adapter
999066NA
N/A
Compatible Expansion Modules
Part Number
Module Firmware
PS Current Required *
EliteX Keypad
EliteX-SIFER Keypad
995400/CM
995400SI
V3.1.0 or later
17mA (Idle) 50mA max.
72mA (Idle) 186mA max.
8-32 Zone LAN Expander Module
996005PCB&K
V3.2.0 or later
70mA (Idle)
110mA (Both Relays On)
Standard LAN Access Module (SLAM)
996012PCB&K
V4.0.7 or later
110mA (Idle)
175mA (Lock Relays On)
Intelligent LAN Access Module (ILAM).
Inception Controller Firmware must be
V6.0.0 or later.
996018PCB&K
V4.1.0 or later
110mA (Idle)
175mA (Lock Relays On)
Inovonics RF LAN Expander Module
996008
V1.1.0 or later
115mA
UniBus 8 Zone Expander †
996500PCB&K
V1.0.3 or later
75mA
UniBus 8 Relay Expander †
996515PCB&K
V1.1.2 or later
45mA (Idle)
175mA (All Relays On)
UniBus 2 Door Expander †
996535PCB&K
V1.0.4 or later
40mA
110mA (Lock Relays On)
UniBus 16 Floor Lift I/F Board †
996540PCB&K
V1.0.0 or later
310mA (All Relays On)
LAN Ethernet Bridge. Inception
Controller Firmware V5.2.0 or later
recommended.
996088PCB&K
V1.1.0 or later
60mA