EasyManua.ls Logo

Innova 5 - Installation

Innova 5
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14

INSTALLATION
3�1 Preliminary warnings
This section is dedicated to the Installer. The fea-
tures of the installer are described in the "Recipi-
ents" p.7 chapter.
For detailed information on the products, refer to
chapter "Technical information" p.64.
For detailed information on accessories please re-
fer to the "Conguration accessories" p. 55 sec-
tion.
The installation must be carried out by the installer.

the installation is not performed correctly.
During the installation, it is necessary to observe the
precautions mentioned in this manual, and on the la-
bels placed inside the equipment, as well as to adopt
any precaution suggested by common sense and by the
Safety Regulations in force in the place of installation.
        
parts. Use of other parts may cause the unit to come to

Failure to apply the indicated rules may cause malfunc-
tions of the appliances and relieves the manufacturer
from any warranty and from any damage caused to per-
sons, animals or property.
3�1�1 Preliminary warnings for R32
Safety checks must be carried out to ensure that the
risk of combustion is minimised before starting work on

The appliance must be protected against accidental im-
pacts to prevent mechanical damage.
Do not puncture or burn.
3�2 Reception
3�2�1 Preliminary warnings
Upon receipt of the package check that it is not dam-
aged, otherwise accept the goods with reserve, produc-
ing photographic evidence of any damage.
In the event of damage, notify the shipper within 3 days
of receipt of any damage by registered mail with return
receipt, submitting photographic evidence. Similar in-
formation should be sent by fax to the manufacturer
(jurisdiction will be at the Court Trento for any dispute).
No notice of damage will be accepted after 3 days from
delivery.
3�2�2 Package description
The packaging is made of suitable material and carried out
by experienced personnel.
The appliance is shipped in standard packaging consisting
of a cardboard sleeve and a set of expanded polystyrene
protectors.
There is a pallet underneath the packaging of the unit to
facilitate transport and moving.
Units are delivered complete and in perfect condition.

Table of Contents

Related product manuals