19
3�8 Handling without packaging
3�8�1 Preliminary warnings
-
sonnel, adequately equipped and with equipment suit-
able for the weight and dimensions of the appliance.
Move the unit to an upright position.
The unit is provided with four ball wheels to facilitating
handling.
The use of protective gloves is mandatory.
The use of protective shoes is mandatory.
3�8�2 Movement methods
1� Ball wheels for movement
2� Locking feet
1
2
To handle:
– slide the appliance slowly
– turn the appliance to rest it on the ground
– slide the pallet out completely
– move the unit by pushing it
The machine must be handled with the utmost care to
prevent the unit from tipping over.
3�9 Installation site
The location of the appliance must be determined by the
plant engineer or a competent person and must take into
account both purely technical requirements and any na-
tional/local legislation in force.
The appliance is intended to be installed indoors.
3�9�1 Preliminary warnings
Avoid installing the unit near:
• narrow places where the sound level of the appliance
can be enhanced by reverberations or resonances
• -
plosive gases
• very humid environments (laundries, greenhouses,
etc.)
• environments with aggressive atmospheres
• solar radiation and proximity to heat sources
To Next Page
Loading...
