- 11 -
Item Specifications
Shared DC
Bus
Function
It can realize the function that multiple drivers share
the DC bus.
QUICK key The user can freely define short-cut menus.
MF.K Key
Programmable key: Select the command channel
switching/forward and reverse rotations/jog
operation.
Running
command
channel
Three types of channels: operation panel setup,
control terminal setup,serial communication port
setup and CAN communication port setup . These
channels can be switched in various modes.
Frequency
source
There are types of frequency sources, such as
analog voltage setup, analog current setup, serial
portsetup and CAN setup. These frequency sources
can be switched in various modes.
Auxiliary
Frequency
source
It can implement micro tuning and synthesis of
auxiliary frequency.
Input
terminal
There are five digital input terminals, It can be
compatible with enabled PNP or NPN input mode.
One motor PTC overheating protection input
terminal.
There are three analog input terminals, two of which
can be used only as voltage input, while the other
can be used as voltage or current input.
Run
Output
terminal
There are three relay input terminals.One is NO/NC
with optional, the other two are NO.
Two analog output terminals, with optional 0//4mA to
20mA or 0/2V to 10V.
Communicat
ion terminal
CAN Communication terminal
RS485 Communication terminal
To Next Page
Loading...
