- 27 -
Chapter 3 Mechanical and Electric
Installation
3.1 Mechanical installation
3.1.1 Installation environment:
1) Ambient temperature: The ambient temperature exerts great
influences on the service life of the servo driver and is not allowed to
exceed the allowable temperature range (-10 Celsius to 50 ℃℃
Celsius).
2) The driver shall be mounted on the surface of incombustible articles,
with sufficient spaces nearby for cooling. The servo driver is easy to
generate large amount of heat during the operation. The servo
driver shall be mounted vertically on the base with screws.
3) The servo driver shall be mounted in the place without vibration or
with vibration of less than 0.6G, and shall be kept away from such
equipment as punching machine.
4) The servo driver shall be mounted in locations free from direct
sunlight, high humidity and condensate.
5) The servo driver shall be mounted in locations free from corrosive
gas, explosive gas or combustible gas.
6) The servo driver shall be mounted in locations free from oil dirt, dust,
and metal powder.
AA
Ｂ
Ｂ
IS300
上
右
Single Unit Installation Diagram Installation Diagram of
Upper and Lower Parts
To Next Page
Loading...
