Inovance IS300T080-C - ERR09 Under Voltage Fault; ERR10;ERR11 Driver;Motor Overload

- 181 -
Err08（Reserved）
Fig.9-7 Under Voltage Fault (ERR09)
Err11
If the motor protection parameter
F9-01 is set properly
If the load is too heavy or motor does not rotate
Set this parameter properly
Reduce the load and check the
motor and machinery
Increase the driver
capacity level
Motor overload
No
Yes
Yes
No
Err10
Driver overload
Fig.9-8 Servo Driver/Motor Overload (ERR10/ERR11)