- 47 -
4） Keyboard button description
Button Name Function
PRG
Programming
key
entry and exit of primary menu, deletion of
shortcut parameter
ENTER
Confirmation
key
enter the menu interfaces level by level, and
confirm the set parameters.
∧ Increase key
increase of the data or function code
∨ Decrease key
decrease of the data or function code
>> Shift key
Select the displayed parameters in turn on
the stop display interface and running
display interface, and select the modification
digit of parameters when modifying
parameters.
RUN Running key
It is used to start the running of the driver
under keyboard control mode.
STOP/RESET Stop/reset
Press this button to stop the running in the
running status and reset the operation in the
fault alarm status. These button
characteristics are limited by the function
code F7-02.
QUICK Shortcut key
It can be used to enter or exit level 1 menu
of the shortcut menu. Refer to the QUICK
operation description for details.
MF.K
Multi-function
selection key
In case F7-01=0, it has no function;
In case F7-01=1, it serves as the key
switching between local operation and
remote operation.
In case F7-01=2, it serves as
forward/reverse rotation switching key;
In case F7-01=3, it serves as forward
rotation Jog key;
Refer to F7-01 for the detailed operation.
Table 4-1 Keyboard Function
To Next Page
Loading...
