Inovance MD280 Series - Page 155

MD280/MD280N User Manual Parameter Description
- 155 -
Adjusted Setting
Frequency (Hz)
Frequency Falling
Skip Frequency 1
Skip Frequency Amplitude
Frequency Setting Signal
Skip Frequency Amplitude
Frequency Rising
Adjusted Setting
Frequency (Hz)
Frequency Falling
Skip Frequency 1
Skip Frequency Amplitude
Frequency Setting Signal
Skip Frequency Amplitude
Frequency Rising
Fig 6-16 Schematic Diagram for Skip Frequency
Dead zone time of
Forward and reverse
rotations
Factory
default value
0.00s
F5-08
Setup value 0.0s to100.0s
It refers to the transit time at the zero frequency output point when the
inverter switches between forward rotation and reverse rotation. The dead
zone time is as shown in Fig.6-13:
Output
Frequency (Hz)
Forward Rotation
Reverse R
o
Dead Zone Time
Output
Frequency (Hz)
Forward Rotation
Reverse R
o
Dead Zone Time
Fig 6-17 Schematic Diagram for Dead Zone Time of Forward and Reverse rotations
efesotomasyon.com