Operating Panel
‑34‑
Key Name
Function
OK key Enters or confirms settings.
Navigation key Under the multi‑function display: Pressing the left/
right shift key toggles the status of display.
Under the parameter number display:
● Basic menu, user menu, and calibration menu: On
the monitor page, the down key is used as a
keyboard potentiometer, and the left and right keys
are used to toggle monitoring variables. On the
parameter page, the up and down keys are used to
adjust set values, the left and right keys are used to
select setting digits, and the OK key is used to
confirm the set value.
● Fault list: The left and right keys are used to cycle
through fault logs.
Multi‑function
key
Provides function options for the user to choose
from, including command source switchover,
switchover between forward and reverse run, and
jog.
Run key Starts the AC drive in the operating panel control
mode.
Stop/Fault reset
key
Stops the AC drive when the AC drive is running.
Resets the AC drive upon a fault.
To Next Page
Loading...
