Inovance MD520 Series - Control Circuit Terminals

Installation
‑68‑
T10 to T12 models
R
S
T
U
V
W
Figure 5‑30 Layout of main circuit terminals of T10 to T12 models
Table 5–14 Main circuit terminals of T10 to T12 models
Mark
Name
Function
R, S, T
Three‑phase power input
terminals
Used to connect to a three‑
phase AC input power supply
+, ‑
DC bus positive and negative
terminals
Common DC busbar input, used
to connect to an external
braking unit
U, V, W
AC drive output terminals Used to connect to a three‑
phase motor
Grounding (PE) terminal Used for protective grounding
5.8.3 Control Circuit Terminals
" Table 5–16 " on page 72 describes control circuit terminals.