Installation
‑50‑
No. Name
9 Bracket
10 Plastic bag
11 Corrugated cardboard
5.5.2 Transportation Before Unpacking
T1 to T12 models
Precautions for transporting T1 to T12 models:
● T1 to T6 models are relatively small and light and therefore can be handled
manually. T7 to T12 models, however, must be transported with an appropriate
lifting tool.
● Fasten the AC drive onto a wooden pallet for transport on a forklift. Fasten the AC
drive onto a pallet before hoisting it, as shown in the following figure.
Figure 5‑10 Hoisting the AC drive
● T9 to T12 models are heavy with a high center of gravity. Therefore, avoid placing
them on any surface inclining greater than 5 degrees. Place the AC drive on a flat
and sturdy floor capable of bearing the weight of the AC drive.
To Next Page
Loading...
