-6-
Safety Precautions
● Before unpacking, check whether the packing is intact without damage, water seepage,
damp, and deformation.
● Unpack the package by following the unpacking sequence. Do not strike the package
violently.
● When unpacking, check the surface of the equipment and accessories for damage, rust,
and scratches.
● After unpacking, check the equipment, accessories, and materials in the package against
the packing list.
Storage and Transportation
● Use specialized hoisting equipment and qualified staff to move large-scale or heavy
equipment. Failure to comply may result in physical injuries or equipment damage.
● Before hoisting the equipment, ensure that the equipment components such as the
front cover and terminal blocks are secured firmly with screws. Loosely-connected
components may fall off and result in physical injuries or equipment damage.
● Never stand or stay below a lifted or hoisted equipment.
● When lifting the equipment with a steel wire rope, lift it steadily at a constant rate to
prevent it from vibration, shock, and turnover. Do not keep the equipment lifted for a
long time. Failure to comply may result in injuries or equipment damage.
● Handle the equipment with care and mind your steps. Failure to comply may result in
physical injuries or equipment damage.
● When carrying the equipment with bare hands, hold the equipment casing firmly with
care to prevent parts from falling. Failure to comply may result in physical injuries.
● Store and transport the equipment in strict accordance with the storage and
transportation requirements. Failure to comply will result in equipment damage.
● Avoid storing or transporting the equipment in environments with water splash, rain,
direct sunlight, strong electric field, strong magnetic field, and strong vibration.
● Avoid storing the equipment for more than 3 months. Long-term storage requires
stricter protection and necessary inspections.
● Pack the equipment strictly before transportation. Use a sealed box for long-distance
transportation.
● Never transport the equipment with other equipment or materials that may harm or
have negative impacts on it.
Installation
● Operations must be carried out by professionals who have received necessary electrical
training. Operations by non-professionals are strictly prohibited.
To Next Page
Loading...
Need help?
General