Electrical Installation
‑39‑
Figure 6‑5 Wiring between the servo drive and terminal‑type motor
Table 6–2 Description of the flying leads power cable connector (motor side)
Flange Size
[1]
Outline Drawing of the
Connector
Terminal Pin Layout
Pin No.
Signal Name
Color
Flying leads
type:
40
60
80
Black 6‑pin connector
Recommendation: Plastic
housing: MOLEX‑50361736
Terminal: MOLEX‑39000061
1
U
White
2
V
Black
4
W
Red
5
PE
Yellow/
Green
3
Brake (polarity
insensitive)
Brown
6
Blue
Note
● [1]: The motor flame size indicates the width for installing the flange.
● Power cable colors are subject to the actual product. All cable colors mentioned in
this guide refer to Inovance cable colors.
● The following table describes the connector for high‑power motor power cables.
To Next Page
Loading...
