Terminals
‑53‑
Table 3–9 Description of encoder terminal pins
Pin No.
Description Description
1 +5 V
5 V power supply
2 GND
3
Reserved
‑
4
Reserved
‑
5 PS+
Encoder signal
6 PS–
Enclosure
PE
Shield
Terminal descriptions
Figure 3‑9 Wiring example of absolute encoder signals
[1]
Note
● [1] The preceding figure shows the wiring of a 23‑bit multi‑turn absolute encoder.
● The encoder cable color is subject to the color of the actual product. Cable colors
mentioned in this guide all refer to Inovance cables.
Lead wires of the battery box:
To Next Page
Loading...
