5G INDOOR ROUTER FG2000 USER GUIDE 67
Custom Applications
You can define up to ten custom applications.
Add custom application: Use this button to add a new row to the custom application list.
• On: Check this box if you want the new application to be able to access the Internet.
• Application Name: Enter a name for the custom application.
• Start Port: Enter the beginning of the range of port numbers used by outgoing traffic for the
custom application being added.
• End Port: Enter the end of the range of port numbers used by the application.
NOTE: If the application uses a single port instead of a range, type the same value for both the
Start Port and the End Port.
• Protocol: Select the protocol used by the port range from the drop-down list (TCP, UDP, or
both).
• Delete: Check this box to delete a custom application. NOTE: Click on the Port Filtering tab
again to remove deleted custom applications from view on the screen.
Click Save changes to save any changes made to the custom applications.
To Next Page
Loading...
