5G INDOOR ROUTER FX3100 USER GUIDE 56
Cellular tab
Use this tab to set options for the cellular network.
Cellular Network Technology
Allow device to connect to the mobile network while roaming: Use the ON/OFF slider to turn off
cellular data and prevent access to the mobile network when roaming.
Network Technology: Your FX3100 is set to Auto (LTE/5G) by default, which prioritizes 5G but allows
4G and other non-5G technologies to be used. If you select 4G LTE or 5G from the drop-down, your
FX3100 is restricted from connecting to networks not using that technology, for example: if you select
4G LTE, your FX3100 will be unable to connect to 5G networks.
5G Network Mode: Your FX3100 is set to Auto (NSA/SA) by default, allowing it to use both standalone
5G and non-standalone 5G, which utilizes 4G anchor bands. You can use the drop-down to select non-
standalone (NSA) or standalone (SA) 5G network modes.
Enable automatic network selection: When the ON/OFF slider is ON, your FX3100 automatically
selects the best 5G available network and you cannot use the Select Network Manually button
below.
Select Network Manually: You may wish to use this option if multiple networks are available, and you
have a preference. Click the button to scan for available networks, then choose the preferred network.
NOTE: This option is available only if Enable automatic network selection is off.
Click Save Changes. The device will reboot for changes to take effect.
To Next Page
Loading...
