5G INDOOR ROUTER FX3100 USER GUIDE 9
Getting started
This section provides instructions for getting your FX3100 up and running, as well as reset and support
information.
Installing a SIM card
A SIM card is a small rectangular plastic card that stores your phone number and important information
about your wireless service. The FX3100 supports only Nano SIM cards.
CAUTION! Always use a factory-made SIM card supplied by the service provider. Do not bend or scratch
your SIM card. Avoid exposing your SIM card to static electricity, water, or dirt.
To install a SIM card:
1. If necessary, remove the SIM card from the protective sleeve, being careful not to touch the
gold-colored contacts.
2. Insert the SIM card into the SIM slot, notch first, with the gold-colored contact points facing
down.
NOTE: Should your SIM card be lost or damaged, contact your network operator.
To Next Page
Loading...
