EasyManua.ls Logo

Inseego Wavemaker FX3100 - SIM Tab

Inseego Wavemaker FX3100
87 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5G INDOOR ROUTER FX3100 USER GUIDE 58
SIM tab
The SIM card in your FX3100 can be locked using a PIN. If the SIM card is locked, you must enter the
PIN before connecting to the mobile network. Once entered, the PIN is remembered until the next
shutdown. You may also need to provide the existing PIN to change a SIM. The default PIN is available
from your service provider.
Use this page to unlock your SIM or enter a SIM PIN.
SIM Settings
SIM PIN lock: The status of the SIM PIN lock.
SIM Status: The current status of the SIM card. Possible states include:
ReadyNo SIM PIN is needed.
PIN Locked - SIM PIN must be entered before you can use the mobile network. NOTE: If an
incorrect PIN is entered too many times, the SIM becomes PUK locked. A counter indicates
how many incorrect entries will cause PUK lock. Once PUK locked, the PUK must be obtained
from your service provider.
PUK Locked - PUK (personal unblocking key) for the SIM must be entered in order to continue.
The PUK can be obtained from your service provider. Enter the PUK. Enter and confirm a new
PIN and click Unlock. NOTE: If an incorrect PUK is entered too many times, the SIM becomes
permanently unusable. You will need to obtain a new SIM. A counter indicates how many
entry attempts remain.
Unlocked - SIM PIN was needed but has already been entered.
No SIM - No SIM is detected. Check that the SIM is inserted correctly.
SIM Error - SIM is detected but is not responding as expected and cannot be used.
Desired Action: The actions available depend on the SIM status. Possible operations include:
Turn on PIN Lock - Sets the SIM so that entry of a PIN is required upon startup to connect to the
mobile network. To perform this operation, you must enter the current PIN.

Table of Contents

Related product manuals