Insignia NS-DXA3 User Manual

CONNECTING WITH AN AV CABLE (BETTER)
You can use this option if your TV has Video (yellow) and Audio Left/Right
(white/red) AV ports.
1. Connect your existing antenna cable to the RF IN jack on the converter
box. You may need to remove the antenna cable from the back of your TV
and connect it to the converter box.
2. Connect a yellow video cable (not included) from the converter box’s
VIDEO OUT jack to your TV’s VIDEO IN jack.
3. Connect a red and white audio cable (not included) from the converter
box’s AUDIO OUT L/R jacks to your TV’s AUDIO IN L/R jacks.
4. Connect the AC adapter from the DC IN jack to a power outlet.
5. See Setting initial setup options (on page12) to finish setting up your
converter.
www.insigniaproducts.com
10
NS-DXA3

Insignia NS-DXA3 Specifications

General

Brand	Insignia
Model	NS-DXA3
Category	Media Converter
Language	English