Insignia NS-DXA3 User Manual

Installing the remote control batteries
1. Press the tab on the battery cover, then remove the cover.
2. Insert two AA batteries (included). Make sure that the direction of the +
and – symbols on the batteries match the + and – symbols in the battery
compartment.
3. Replace the battery cover.
Setting up your converter box
You can connect your converter box with HDMI (not included), AV (not
included), or coaxial (included) cables. You must connect an antenna to your
converter box.
CONNECTING WITH AN HDMI CABLE (BEST)
An HDMI connection provides the best video and audio quality.
1. Connect your existing antenna cable to the RF IN jack on the converter
box. You may need to remove the antenna cable from the back of your TV
and connect it to the converter box.
2. Connect an HDMI cable (not included) from the converter box’s HDMI
OUT port to your TV’s HDMI IN port.
3. Connect the AC adapter from the DC IN jack to a power outlet.
4. See Setting initial setup options (on page12) to finish setting up your
converter.
www.insigniaproducts.com
9
Digital to Analog Converter Box

Insignia NS-DXA3 Specifications

General

Brand	Insignia
Model	NS-DXA3
Category	Media Converter
Language	English