Inspire CS3 - Handle Assembly

10
HANDLE ASSEMBLY (See Step 2 Figure)
A.) Turn handle adjustment knob inward and slide the Right Handle Assembly (#21) into the Right
Swing Arm Sleeve (#47). Adjust to desired position and tighten.
WARNING: Check to make sure the Right Handle Assembly has an “R” Sticker on it.
Accidental switching of the Right and Left Handle Assemblies can result in serious injury.
B.) Turn handle adjustment knob inward and slide the Left Handle Assembly (#42) into the Left
Swing Arm Sleeve (#54). Adjust to desired position and tighten.
WARNING: Check to make sure the Left Handle Assembly has an “L” Sticker on it.
Accidental switching of the Right and Left Handle Assemblies can result in serious injury.