12
User Manual
Turning the sound On/Off
You set the alert sounds to either ON or OFF.
1. When the Message Bar shows Ready, press and hold Delay Start
and the Control Dial for 5 seconds.
2. The Message Bar shows Sound On or Sound Off.
3. Repeat as needed.
Audible safety alerts (beeps) cannot be turned off.
Choosing the temperature scale
You can choose to show cooking temperature in either Fahrenheit or
Celsius.
1. When the Message Bar shows Ready, press and hold Keep Warm
and the Control Dial for 5 seconds.
2. The Message Bar shows Temp Unit F or Temp Unit C.
3. Repeat as needed.
Cooking temperature will now show in the scale you chose.
Cancel cooking
When in Preheating, Cooking or Keep Warm modes, press Cancel. The
Message Bar shows Ready.
Memorized settings
Each time you use a Smart Program, the multi-cooker memorizes the
settings you select and they become the default the next time you use
that program. Each time you use a Smart Program, you can use the
default settings or change them. This applies to:
• Pressure settings
• Temperature settings
• Steam release settings
• NutriBoost
™
settings
To Next Page
Loading...
