22
User Manual
RICE
The Rice Smart Program uses pressurized steam to cook rice quickly
and evenly. You can adjust the settings as your recipe directs.
Choose from these settings in the Rice Smart Program. The program
uses the default settings or the settings you selected the last time you
used the Rice program.
Default Cook
Time
Min Cook
Time
Max Cook
Time
Default
Pressure
Level
Pressure
Level
Options
12 minutes
(00:12)
0 minutes
(00:00)
1 hour
(01:00)
Low High
Low
Other settings
• Keep Warm is set to ON by default.
• Delay Start is available.
• NutriBoost
™
is available (see page 38).
How to cook rice
Preheat
1. Place the cooking pot into the multi-cooker base and add
ingredients and liquid.
2. Place the lid on top of the multi-cooker base and lock the lid.
3. Press Rice.
4. Press Pressure to toggle between Low and High pressure levels.
5. Press the hours field, then minutes field to activate them, then
turn the Control Dial to select the time.
6. Press the venting field to toggle between Natural, Pulse and Quick
pressure release options.
7. If you want to activate NutriBoost, press the NutriBoost field to
turn it ON.
To Next Page
Loading...
