48
User Manual
ERROR CODES
If the control panel shows an error code from this list, there is an issue
with the Instant Pot Pro Plus. Here are the actions you should take to
fix the problem.
Problem Cause Solution
C1 Faulty sensor Contact Consumer Care.
Lid Lid is not in the correct
position for the selected
program
Open and close the lid.
Do not use a lid when
using Sauté.
Food burn High temperature detected
at bottom of cooking pot;
multi-cooker automatically
reduces temperature to
avoid overheating
Starch deposits at the
bottom of the cooking pot
may have blocked heat
dissipation.
Turn the multi-cooker off,
release pressure according
to the recipe, and inspect
the bottom of the cooking
pot.
PrSE Pressure has accumulated
during a non-pressure
cooking program
Set Steam Release to Quick
release.
To Next Page
Loading...
