47
User Manual
Problem Cause Solution
Display remains blank after
connecting the power cord
Bad power connection or
no power
Inspect power cord for
damage. If damage is
noticed, contact Consumer
Care.
Check outlet to ensure it is
powered.
Cooker’s electrical fuse has
blown
Contact Consumer Care.
Occasional clicking or light
cracking sound
The sound of power
switching and expanding
pressure board when
changing temperatures
This is normal; no action
needed.
Bottom of the cooking pot
is wet
Wipe exterior surfaces of
cooking pot. Ensure heating
element is dry before
inserting cooking pot into
multi-cooker base.
Error code appears on
display and multi-cooker
beeps continuously
There is an issue with the
multi-cooker
Read “Error Codes” for
instructions.
To Next Page
Loading...
