41
User Manual
MAINTENANCE
Your Instant Pot Pro Plus includes parts that enable pressure cooking.
These parts must be installed for pressure cooking to work properly
and either cleaned or replaced regularly.
Sealing ring
When the pressure cooking lid is closed, the sealing ring installed on
the underside of the lid creates an air-tight seal between the lid and
the multi-cooker base.
•
The sealing ring must be installed before using the multi-cooker and
should be cleaned after each use.
•
Install 1 sealing ring at a time; use one for sweet dishes and one for savory.
•
Sealing rings stretch over time with normal use. To keep your product safe,
replace the sealing ring every 12 to 18 months. Replace sooner if you
notice stretching, deformation, or damage.
Install the Sealing Ring
1. Place the sealing ring behind the sealing ring rack and press it into
place. Press down firmly to ensure there is no puckering.
2. The sealing ring should be snug and should not fall out when the lid
is turned over.
Failure to adhere to safety instructions may result in personal
injury and/or property damage and may void your warranty.
To Next Page
Loading...
