3. Software Installation
Computer Requirements: Windows operating system
Installing VeriFier Software on a PC
Object: Allow the operator to access the software and re-calibrate a nuclear
gauge.
Support: Before loading any software, consult with your organization PC
Manager or operating system manuals.
Locate your flash drive included with your ValiDator system. Please
read license agreement before opening software package. This
software should only be loaded on one computer. Access codes will
be needed to complete installation.
NOTE: ValiDator and its’ associated software is licensed to a single user. Use
of the ValiDator and its’ associated software is not allowed for
calibration of gauges from other organizations.
Windows
1. Download VeriFier software from USB flash drive provided by InstroTek.
2. Follow prompts, click finish when complete.
3. Call InstroTek for registration codes:
Enter Main Registration Code
Click on Calibrate and enter Calibration Registration Code
Enter Password “calibratenow” or “calnow”
Provide Product Key to InstroTek service Representative
Enter Product Code
Upgrading Software Version
You may load the new software version directly over the existing version and not
lose your existing data.
Close all Windows programs.
To Next Page
Loading...