Integra DRX-2.3 - Page 123

123
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Setting Item Default Value Setting Details
STRM BOX Zone 2 Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "STRM BOX" is selected as
input for main room.
"Zone 2": Output when "STRM BOX" is selected as
input for ZONE2.
"Main/Zone 2": Output when "STRM BOX" is
selected as input for main room or ZONE2.
PC Zone 2 Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "PC" is selected as input for
main room.
"Zone 2": Output when "PC" is selected as input for
ZONE2.
"Main/Zone 2": Output when "PC" is selected as
input for main room or ZONE2.
AUX Zone 2 Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "AUX" is selected as input for
main room.
"Zone 2": Output when "AUX" is selected as input
for ZONE2.
"Main/Zone 2": Output when "AUX" is selected as
input for main room or ZONE2.
CD Zone 2 Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "CD" is selected as input for
main room.
"Zone 2": Output when "CD" is selected as input for
ZONE2.
"Main/Zone 2": Output when "CD" is selected as
input for main room or ZONE2.
Setting Item Default Value Setting Details
TV Zone 2 Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "TV" is selected as input for
main room.
"Zone 2": Output when "TV" is selected as input for
ZONE2.
"Main/Zone 2": Output when "TV" is selected as
input for main room or ZONE2.
PHONO Zone 2 Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "PHONO" is selected as input
for main room.
"Zone 2": Output when "PHONO" is selected as
input for ZONE2.
"Main/Zone 2": Output when "PHONO" is selected
as input for main room or ZONE2.
TUNER Zone 2 Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "TUNER" is selected as input
for main room.
"Zone 2": Output when "TUNER" is selected as
input for ZONE2.
"Main/Zone 2": Output when "TUNER" is selected
as input for main room or ZONE2.
NET Zone 2 Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "NET" is selected as input for
main room.
"Zone 2": Output when "NET" is selected as input
for ZONE2.
"Main/Zone 2": Output when "NET" is selected as
input for main room or ZONE2.