MS-CHAP-V2: This parameter specifies the authentication protocol operating over the PEAP tunnel.
1. User Credentials: Select one of the following options: Use Windows logon
, Prompt each time I connect, or
Use the following
. For Persistent profiles, the options are Use the following or Use secured password.
2. Click Next to open the PEAP Server settings.
TLS: Transport Layer Security authentication is a two-way authentication method that exclusively uses digital
certificates to verify the identity of a client and a server.
1. Obtain and install a client certificate. See Create a Windows* XP Profile for TLS authentication
or consult
your system administrator.
2. Select one of the following to obtain a certificate: Use my smart card
, Use the certificate issued to this
computer, or Use a user certificate on this computer. If this is a Persistent, Administrator profile, only Use
the certificate issued to this computer is available.
3. Click Next to open the PEAP Server settings.
Step 2 of 2: PEAP Server
Intel® PROSet/Wireless WiFi Connection Utility User's Guide
To Next Page
Loading...
