1. Select one of the following credential retrieval methods: Validate Server Certificate or Specify Server or
Certificate Name.
2. Click OK. The profile is added to the Profiles list.
3. Click the new profile at the end of the Profiles list. Use the up and down arrows to change the priority of the
new profile.
4. Click Connect to connect to the selected wireless network.
If you did not select Use Windows logon on the Security Settings page and also did not configure
user credentials, no credentials are saved for this profile. Please enter your credentials to authenticate
to the network.
5. Click OK to close the utility.
Create a Profile with LEAP Network Authentication
Cisco LEAP (Light Extensible Authentication Protocol) is an 802.1X authentication type that supports strong mutual
authentication between the client and a RADIUS server. The LEAP profiles settings include LEAP, CKIP with Rogue
access point detection integration.
Profile Mapping
This profile will be exported differently to clients running Windows* XP as compared to Windows Vista* and
Windows* 7. See
LEAP Profile Mapping for more information.
To Create a Profile with LEAP Authentication
Intel® PROSet/Wireless WiFi Connection Utility User's Guide
To Next Page
Loading...
