8. At the next window, enter the Device Ownership Password that you retrieved from the access point in step
1. Click Next to continue.
9. The next window shown displays the Network Name, Security Type, and Password. If the access point is
already configured, it is grayed out; proceed to step 10. If the access point is not configured (fields are not
grayed out), proceed to step 11.
10. After a few seconds the following message is displayed:
The access point is already configured. Do you want to reconfigure it?
If you do not want to reconfigure the access point, select No. The software joins the network, makes the
connection, and creates a profile. It then exits and this procedure is completed. If you want to reconfigure
the access point, select Yes.
Intel® PROSet/Wireless WiFi Connection Utility User's Guide
To Next Page
Loading...
Need help?
General
