4. The next window appears, displaying the Device Password (enrollee password). The password displayed at
the enrollee is a unique, randomly generated temporary password for the enrollee. This password is used to
ask permission to connect to the network access point. (The password shown below is an example only.).
5. At the registrar, enter the password provided by the enrollee. Then click Next.
NOTE: This process assumes that the registrar is running the WiFi connection utility; the process and
windows displayed at the registrar may be different for software from other vendors. Some access points
may have a built in registrar.
Intel® PROSet/Wireless WiFi Connection Utility User's Guide
To Next Page
Loading...
Need help?
General
