Intel Agilex I Series User Manual

3.5. The Required SmartVID QSF Assignments to Compile a Design
If you are creating your own design and want to generate programming SRAM object
file (.sof), you must add the correct SmartVID setting into the Intel Quartus Prime
project for the Intel Agilex FPGA development kit to configure successfully. Before you
add the following SmartVID setting into the Quartus settings file (.qsf), you must
change the configuration scheme to Avalon
®
streaming interface x8 (AVST x8) for
your project. You can also extract the SmartVID setting from the Golden Top file.
Figure 8. Selecting the Configuration Scheme
3. Development Board Setup
683288 | 2022.09.22
Intel
®
Agilex
™
I-Series FPGA Development Kit User Guide
Send Feedback
20

Intel Agilex I Series Specifications

General

Brand	Intel
Model	Agilex I Series
Category	Microcontrollers
Language	English