EasyManuals Logo
Home>Intel>Motherboard>BOXDH57JG

Intel BOXDH57JG User Manual

Intel BOXDH57JG
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
Intel Desktop Board DH57JG Product Guide
20
Serial ATA Support
The board provides four internal SATA connectors and one back panel eSATA
connector which support one storage device per connector.
Expandability
Intel Desktop Board DH57JG provides one PCI Express 2.0 x16 connector for system
expansion.
Legacy I/O
The board’s Legacy I/O Controller provides the following legacy features:
One serial port header
Serial IRQ interface compatible with serialized IRQ support for PCI Conventional
bus systems
Intelligent power management, including a programmable wake-up event interface
The BIOS Setup program provides configuration options for the Legacy I/O controller.
BIOS
The BIOS provides the Power-On Self-Test (POST), the BIOS Setup program, and the
PCI Express and SATA auto-configuration utilities. The BIOS is stored in the Serial
Peripheral Interface (SPI) Flash device.
The BIOS can be updated by following the instructions in Chapter 3 starting on
page 59.
Serial ATA Auto Configuration
If you install a SATA device (such as a hard drive) in your computer, the auto-
configuration utility in the BIOS automatically detects and configures the device for
your computer. You do not need to run the BIOS Setup program after installing a
SATA device. You can override the auto-configuration options by specifying manual
configuration in the BIOS Setup program.
PCI*/PCI Express Auto Configuration
If you install a PCI Express add-in card in your computer, the PCI Express auto-
configuration utility in the BIOS automatically detects and configures the resources
(IRQs, DMA channels, and I/O space) for that add-in card. You do not need to run the
BIOS Setup program after you install a PCI Express add-in card.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel BOXDH57JG and is the answer not in the manual?

Intel BOXDH57JG Specifications

General IconGeneral
ECCNo
Memory channelsDual-channel
Number of memory slots2
Supported memory typesDDR3-SDRAM
Maximum internal memory8 GB
Product familyDesktop board
Product seriesLegacy Intel desktop board
Processor socketLGA 1156 (Socket H)
Product codenameJet Geyser
Processor manufacturerIntel
USB 2.0 connectors12
S/PDIF out connectorYes
Number of SATA connectors4
Number of Parallel ATA connectors0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports1
Audio chipRealtek ALC889
Market segmentDesktop
Power source typeATX
Motherboard chipsetIntel® H57 Express
Audio output channels7.1+2 channels
Motherboard chipset ID42700
Motherboard form factormini ITX
LAN controllerIntel® 82578DC
Networking features10/100/1000 Mbit
Graphics outputHDMI, DVI-I
Motherboard ARK ID42485
Discrete graphics card modelPCIe x16
Export Control Classification Number (ECCN)5A992C
Commodity Classification Automated Tracking System (CCATS)G400445
StatusDiscontinued
Form factorMini-ITX
Last change63903513
Launch dateQ1'10
Sustainability certificatesENERGY STAR
Supported RAID configuration0, 1, 5, 10 & Matrix
Harmonized System (HS) code8473301180

Related product manuals