Intel U3-1 User Manual

Intel® Server RAID Controller U3-1 User’s Manual Rev 1.0 4-33
Using the Storage Console
iop://localhost/0/8/0
To configure the second SRCU31 (change first “0” to a “1”) use:
iop://localhost/1/8/0
The Storage Console functions in the same way as with one card, except that only the devices that
are attached to it can be configured.
Remote Administration for all OSs
Default setting (the first parameter indicates the IOP #)
http://localhost/scripts/iop.exe/0/8/0
Note: The “/0” parameter directly after “iop.exe” indicating the first IOP is being configured. To switch
from the first adapter to the second simply change the first parameter from “0” to “1” to indicate
that you wish to configure the second SRCU31. See the example below:
To configure the fist SRCU31 (default) use:
http://localhost/scripts/iop.exe/0/8/0
To configure the second SRCU31 (change first “0” to a “1”) use:
http://localhost/scripts/iop.exe/1/8/0
The Storage Console functions in the same way as with one card, except that only the devices that
are attached to it can be configured.
Download from Www.Somanuals.com. All Manuals Search And Download.

Intel U3-1 Specifications

General

Brand	Intel
Model	U3-1
Category	Controller
Language	English