2-70 Intel® Server RAID Controller U3-1 User’s Manual Rev 1.0
Advanced Installation Steps
5. After completing the installation of the components launch the application using the
commands in Table 2-6.
Launching Storage Console
1. Log on to the server as root or equivalent. Launch Netscape, type http://localhost:360/ and hit
Enter.
2. Click on the IOP # card that you want to configure; for example, IOP0, IOP1 etc.
3. Click on the RAID Storage Console link. The Storage Console appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
To Next Page
