Intellian V110 - Page 49

43
Noise Level
Detect Level
Tra c k i n g L e ve l
Peak Level
5. Set DETECT LEVEL and TRACKING LEVEL when choose DVB on tracking
signal. (Range : 1-200)
The detect level is to set the satellite signal detection level and the tracking level is to set
the satellite signal tracking level.
Press LEFT and RIGHT arrow keys until the desired character is underscored (selected).
Press UP and DOWN arrow keys to increase and decrease the selected character. Or
press NUMBER keys to set the desired value directly. Press OK key to set the
parameter. Press RETURN key to select the parameter you wish to edit and press
RETURN key again to save or abort and return to the main display.
DETECT LEVEL TRACKING LEVEL
▲ 0
40 ▼ 020
1
4
7
2
5
8
3
6
9
←
0
·
Antenna Cont rol Unit
OK
M
R
F
DETECT NBD LEVEL TRACKING NBD
▲ 0
40 ▼ 020
1
4
7
2
5
8
3
6
9
←
0
·
Antenna Cont rol Unit
6. Set DETECT NBD LEVEL and TRACKING NDB when choose NBD on tracking
signal. (Range : 1-200)
The detect level is to set the satellite signal detection level and the tracking level is to set
the satellite sign al tracking level.
Press LEFT and RIGHT arrow keys until the desired character is underscored (selected).
Press UP and DOWN arrow keys to increase and decrease the selected character. Or
press NUMBER keys to set the desired valu e directly. Press OK key to set the
parameter. Press RETURN key to select the parameter you wish to edit and press
RETURN key again to save or abort and return to the main display.
OK
M
R
F
Operating the ACU