Intellinet 525688 - 2.4 GHz 11 bgn Settings

33

Wireless Enableordisabletheaccesspoint’s2.4GHzwireless
radio.Whendisabled,no2.4GHzSSIDswillbeactive.
Band Selectthewirelessstandardusedfortheaccess
point.Combinationsof802.11b,802.11g&802.11n
canbeselected.
EnableSSIDNumber SelecthowmanySSIDstoenableforthe2.4GHz
frequencyfromthedrop‐downmenu.Amaximum
of16canbeenabled.
SSID# EntertheSSIDnameforthespecifiedSSID(upto
16).TheSSIDcanconsistofanycombinationofup
to32alphanumericcharacters.
VLANID SpecifyaVLANIDforeachSSID.
AutoChannel Enable/disableautochannelselection.Autocha nnel
selectionwillautomaticallysetthewirelesschannel
fortheaccesspoint’s2.4GHzfrequencybasedon
availabilityandpotentialinterference.When
disabled,selectachannelmanuallyasshowninthe
nexttable.
AutoChannelRange Selectarangefromwhichtheautochannelsetting
(above) willchooseachannel.
AutoChannelInterval Specifyafrequencyforhowoftentheautochannel
settingwillcheck/reassignthewirelesschannel.
Check/uncheckthe“Changechannelevenifclients
areconnected”boxaccordingtoyourpreference.
ChannelBandwidth Setthechannelbandwidth:20MHz(lower
performancebutlessinterference),40MHz(higher
performancebutpotentiallyhigherinterference)or
Auto(automaticallyselectbasedoninterference
level).
BSSBasicRateSet SetaBasicServiceSet(BSS)rate:Thisisaseriesof
ratestocontrolcommunicationframesforwireless
clients.




