Intellinet 525688 - Basic Settings

7

II‐2. BasicSettings

Theinstructionsbelowwillhelpyoutoconfigurethesebasicsettingsofthe
accesspoint:

‐ LANIPAddress
‐ 2.4GHz&5GHzSSID&Security
‐ AdministratorName&Password
‐ Time&Date

Itisrecommendedthatyouconfigurethesesettingsbeforeusing
theaccesspoint.

1.  Tochangetheaccesspoint’sLANIPaddress,goto“NetworkSettings”>
“LAN‐sideIPAddress”andyouwillseethescreenbelow.



2.  EntertheIPaddresssettingsyouwishtouseforyouraccesspoint.You
canuseadynamic(DHCP)orstaticIPaddress,dependingonyournetwork
environment.Click“Apply”tosavethechangesandwaitafewmoments
fortheaccesspointtoreload.

Whenyouchangeyouraccesspoint’sIPaddress,youneedtouse
thenewIPaddresstoaccessthebrowser‐basedconfiguration
interfaceinsteadofthedefaultIP
192.168.2.1. 
