Intellinet 525688 - Page 48

45

interference. Whendisabled,selectachannel
manuallyasshowninthenexttable.
AutoChannelRange Selectarangefromwhichtheautochannel
setting(above)willchooseachannel.
AutoChannel
Interval
Specifyafrequencyforhowoftentheauto
channelsettingwillcheck/reassignthe
wirelesschannel.Check/uncheckthe“Change
channelevenifclientsareconnected”box
accordingtoyourpreference.
ChannelBandwidth Setthechannelbandwidth:20MHz(lower
performancebutlessinterference),Auto
40/20MHzorAuto80/40/20MHz
(automaticallyselectbasedoninterference
level).
BSSBasicRateSet SetaBasicServiceSet(BSS)rate:Thisisa
seriesofratestocontrolcommunication
framesforwirelessclients.

