Intellinet 525800 - 4 How; How to Change the Ip Address of the Access Point; How to 3

High-Power Ceiling Mount Wireless 300N PoE Access Point
33
4. HowTo
HowtochangetheIPaddressoftheaccesspoint?
ThedefaultIPaddressoftheIntellinetaccesspointis191.168.2.1withasubnet255.255.255.0.Ifyou
wanttomakeanadjustmenttothatIPaddress,proceedasfollows:






YoucaneithermakechangestotheIPv4addresstoassignadifferentstaticIPaddress,oryoucanchange
theIPaddressfromstatictoDHCP.WhensettoDHCP,theaccesspointreceivesitsIPaddressfroma
routerinyournetwork.ToenableDHCP,youneedtoselect“DHCPclient”fromthedrop‐downlist,then
clickon .



